nix-conf/configuration.nix
2024-03-25 20:03:03 +05:30

348 lines
9.1 KiB
Nix
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running nixos-help).
# flake-overlays:
{ config, pkgs, lib, inputs, ... }:
{
imports =
[ # Include the results of the hardware scan.
./hardware-configuration.nix
inputs.home-manager.nixosModules.default
];
# Enable Bluetooth
hardware.bluetooth = {
enable = true;
settings = {
General = {
Experimental = "true";
Enable = "Source,Sink,Media,Socket";
};
};
};
# Allow non-free firmware
hardware.firmware = with pkgs; [ firmwareLinuxNonfree ];
hardware.opengl = {
enable = true;
extraPackages = with pkgs; [ vaapiIntel vaapiVdpau libvdpau-va-gl intel-media-driver ];
};
# Bootloader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
boot.loader.efi.efiSysMountPoint = "/boot";
boot.supportedFilesystems = [ "ntfs" ];
# Kernel modules
boot.kernelModules = [ "kvm-intel" "snd-hda-intel" "i8042" "nf_nat_ftp" ];
boot.extraModprobeConfig = ''
options snd-hda-intel model=alc255-acer,dell-headset-multi
options i8042 nopnp=1
'';
boot.kernelParams = [ "allow-discards" ];
boot.kernel.sysctl = {
"net.ipv4.conf.all.forwarding" = true;
"net.ipv4.conf.default.forwarding" = true;
};
# Setup keyfile
# boot.initrd.secrets = {
# "/crypto_keyfile.bin" = null;
# };
fileSystems."/".options = [ "noatime" "nodiratime" "discard" ];
# Enable swap on luks
boot.initrd.luks.devices."luks-3b571a97-616b-4dd7-9abb-d1e0491d178a".device = "/dev/disk/by-uuid/3b571a97-616b-4dd7-9abb-d1e0491d178a";
# boot.initrd.luks.devices."luks-c0ef1093-a74e-4491-8c73-0009d3377c19".keyFile = "/crypto_keyfile.bin";
boot.initrd.luks.devices."luks-3b571a97-616b-4dd7-9abb-d1e0491d178a".allowDiscards = true;
# Allow discard on /
boot.initrd.luks.devices."luks-a09877ce-f520-429a-9f3b-57b073e4d662".device = "/dev/disk/by-uuid/a09877ce-f520-429a-9f3b-57b073e4d662";
boot.initrd.luks.devices."luks-a09877ce-f520-429a-9f3b-57b073e4d662".allowDiscards = true;
networking.hostName = "bridge"; # Define your hostname.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
# Configure network proxy if necessary
# networking.proxy.default = "http://user:password@proxy:port/";
# networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
# Enable networking
networking.networkmanager = {
enable = true;
unmanaged = [ "virbr0" "docker0" ];
};
networking.nftables.enable = true;
networking.firewall.trustedInterfaces = [ "incusbr0" ];
# Set your time zone.
time.timeZone = "Asia/Kolkata";
# Select internationalisation properties.
i18n.defaultLocale = "en_IN";
i18n.extraLocaleSettings = {
LC_ADDRESS = "en_IN";
LC_IDENTIFICATION = "en_IN";
LC_MEASUREMENT = "en_IN";
LC_MONETARY = "en_IN";
LC_NAME = "en_IN";
LC_NUMERIC = "en_IN";
LC_PAPER = "en_IN";
LC_TELEPHONE = "en_IN";
LC_TIME = "en_IN";
};
fonts.packages = with pkgs; [
source-han-serif
noto-fonts-emoji
noto-fonts-cjk
];
# Enable the X11 windowing system.
services.xserver.enable = true;
# Enable the KDE Plasma Desktop Environment.
services.xserver.displayManager.sddm.enable = true;
services.desktopManager.plasma6.enable = true;
# Enable GNOME desktop environment
services.xserver.displayManager.gdm.enable = false;
services.xserver.desktopManager.gnome.enable = false;
programs.xwayland.enable = true;
# Debug infod
services.nixseparatedebuginfod.enable = true;
# Enable hyprland
programs.hyprland = {
enable = true;
xwayland.enable = true;
};
# Change DNS
networking = {
extraHosts = ''
185.199.108.133 raw.githubusercontent.com
'';
nameservers = [ "1.1.1.1" "9.9.9.9" ];
bridges = { incusbr0.interfaces = []; };
# firewall.extraCommands = ''
# iptables -A INPUT incusbr0 -j ACCEPT
# iptables -A FORWARD -o incusbr0 -j ACCEPT
# iptables -A FORWARD -i incusbr0 -j ACCEPT
# iptables -A OUTPUT -o incusbr0 -j ACCEPT
# '';
};
# Enable dde
# services.xserver.desktopManager.deepin.enable = true;
# services.deepin = {
# dde-daemon.enable = true;
# dde-api.enable = true;
# app-services.enable = true;
# };
# Enable dconf
programs.dconf.enable = true;
# Configure keymap in X11
services.xserver = {
xkb.layout = "us";
xkb.variant = "";
};
xdg.portal = {
enable = true;
extraPortals = [ pkgs.xdg-desktop-portal-gtk ];
};
# Enable CUPS to print documents.
services.printing.enable = true;
# Enable sound with pipewire.
sound.enable = true;
hardware.pulseaudio.enable = false;
security.rtkit.enable = true;
services.pipewire = {
enable = true;
alsa.enable = true;
alsa.support32Bit = true;
pulse.enable = true;
# If you want to use JACK applications, uncomment this
#jack.enable = true;
#media-session.enable = true;
};
# Enable touchpad support (enabled default in most desktopManager).
# services.xserver.libinput.enable = true;
programs.zsh.enable = true;
nix.settings.trusted-users = [ "root" "user" ];
# Define a user account. Don't forget to set a password with passwd.
users.users.user = {
isNormalUser = true;
description = "user";
shell = pkgs.zsh;
extraGroups = [ "networkmanager" "wheel" "libvirtd" "qemu" "qemu-kvm" "vo" "docker" "lxc" "incus-admin" ];
packages = with pkgs; [
kate
vim
libvirt
spice-gtk
qemu
qemu_kvm
virt-viewer
virt-manager
OVMF
dnsmasq
networkmanagerapplet
];
};
users.users.root = {
subUidRanges = [
{
count = 1000;
startUid = 1000;
}
];
subGidRanges = [
{
count = 1000;
startGid = 1000;
}
];
};
home-manager = {
extraSpecialArgs = { inherit inputs; };
users = {
"user" = import ./home.nix;
};
};
environment = {
homeBinInPath = true; # Include ~/bin/ in $PATH
localBinInPath = true; # Include ~/.local/bin in $PATH
sessionVariables = {
# tell electron apps to use wayland
NIXOS_OZONW_WL = "1";
};
};
virtualisation.libvirtd.enable = true;
virtualisation.waydroid.enable = true;
virtualisation.docker.enable = true;
virtualisation.lxc.enable = true;
virtualisation.lxc.lxcfs.enable = true;
virtualisation.incus.enable = true;
# Allow unfree packages
nixpkgs.config = {
allowUnfree = true;
packageOverrides = pkgs: {
vaapiIntel = pkgs.vaapiIntel.override { enableHybridCodec = true; };
};
};
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
wget
git
#gnome.adwaita-icon-theme
gnomeExtensions.aylurs-widgets
gnomeExtensions.system-monitor-next
gnomeExtensions.wireless-hid
gnomeExtensions.autohide-battery
gnomeExtensions.bluetooth-battery
gnomeExtensions.clipboard-indicator
gnomeExtensions.lock-keys
gnomeExtensions.openweather
gnomeExtensions.media-controls
gnomeExtensions.ideapad-controls
gnomeExtensions.maximize-to-empty-workspace
gnomeExtensions.hide-top-bar
gnomeExtensions.hide-activities-button
libsForQt5.bismuth
plasma5Packages.bismuth
kdePackages.ksystemstats
(waybar.overrideAttrs (oldAttrs: {
mesonFlags = oldAttrs.mesonFlags ++ [ "-Dexperimental=true" ];
})
)
dunst
libnotify
swww
rofi-wayland
wl-clipboard
grim
pamixer
];
programs.neovim = {
enable = true;
defaultEditor = true;
};
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = {
# enable = true;
# enableSSHSupport = true;
# };
# List services that you want to enable:
# Enable the OpenSSH daemon.
services.openssh.enable = true;
services.nginx = {
enable = true;
virtualHosts = {
"textgen.bridge" = {
locations."/".proxyPass = "http://0.0.0.0:7860";
};
};
};
# Open ports in the firewall.
networking.firewall.allowedTCPPorts = [ 80 443 7860 ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Or disable the firewall altogether.
# networking.firewall.enable = false;
# Nix extra options
nix.extraOptions = ''
experimental-features = nix-command flakes
'';
# This value determines the NixOS release from which the default
# settings for stateful data, like file locations and database versions
# on your system were taken. Its perfectly fine and recommended to leave
# this value at the release version of the first install of this system.
# Before changing this value read the documentation for this option
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
system.stateVersion = "22.11"; # Did you read the comment?
}